Product enquiryDEFENCE / CANADIAN PROJECT ENQUIRIES
Start with the platform, substrate and project specification. Define the coating requirements before selecting a system.
Tell us the equipment, surface material, existing coating and preparation method.
Share the required colour, gloss, operating environment and primer/topcoat requirements.
Provide any applicable specification or qualification requirement. Suitability and compliance must be verified for the exact product and system.
Military intended use does not by itself establish certification, approval or compliance with a military standard. Include the exact standard, revision and testing requirements in your enquiry.
NOVOL PRODUCT INFORMATION
Manufacturer information supports product selection. Confirm the current documentation, system compatibility and project requirements before use. Product listings do not confirm stock or availability.
These examples refer to the manufacturer’s specified preparation, products and layer build-up. They are not a certification of an individual product or of your project.
Manufacturer illustration · NOVOL
NOVOL’s Military Vehicles system example. Follow the manufacturer’s complete system specification; project suitability must be confirmed.
Total system DFT: 120 µm
The published thickness is for the complete system. Confirm the specified layer schedule with the supplier; individual layer thicknesses are not specified here.
View manufacturer system specification
Manufacturer illustration · NOVOL
NOVOL’s Military Vehicles system example. Follow the manufacturer’s complete system specification; project suitability must be confirmed.
Total system DFT: 200 µm
The published thickness is for the complete system. Confirm the specified layer schedule with the supplier; individual layer thicknesses are not specified here.
View manufacturer system specificationNOVOL / MILITARY COATINGS
Zinc-rich epoxy primer included in NOVOL’s published military-vehicle system example.
Manufacturer product informationEnquire about this product →NOVOL / MILITARY COATINGS
Two-component matt polyurethane finish, designated by NOVOL for military vehicles and equipment.
Manufacturer product informationEnquire about this product →NOVOL / MILITARY COATINGS
Two-component matt polyurethane direct camouflage coating, designated for military vehicles and equipment.
Manufacturer product informationEnquire about this product →NOVOL / MILITARY COATINGS
High-build epoxy anti-corrosion primer, designated by NOVOL for military vehicles and equipment.
Manufacturer product informationEnquire about this product →NOVOL / MILITARY COATINGS
Hardener for polyurethane topcoats. Use according to the relevant topcoat TDS.
Manufacturer product informationEnquire about this product →NOVOL / MILITARY COATINGS
Hardener for ARMORPRIMER EP 2000-20 epoxy primer.
Manufacturer product informationEnquire about this product →NOVOL / MILITARY COATINGS
Thinner for epoxy primer.
Manufacturer product informationEnquire about this product →NOVOL / MILITARY COATINGS
Thinner for polyurethane topcoats.
Manufacturer product informationEnquire about this product →Technical and safety documents are being checked against the exact product and version. Downloads are temporarily withheld during this review. Contact us to discuss the documentation required for your application. Current product, component and regional safety requirements must be confirmed before use.